High - band saw

Moehringer / Braun Canali multi-line TB 1250 MF-20

Year of construction: 2004, Condition: used, High - band saw Crjkycs8u Moehringer / Braun Canali Type multi-line TB 1250 MF-20 Roll diameter 1250 mm Roll width 150 mm Blade speed: 28-50 m/s Connected load: ca. 45kW Feed rollers 2 x 4 Height 200 mm Cutting height lower edge pressure Guide 400 mm and higher Cutting width 250 mm left of the blade and 250 mm right of the saw blade with medium cutting device complete technical documentation Follow original photos

Year of construction: 1990, Condition: not inspected (used), Functionality: unexamined, Include control panel, power supply cabinet and board in feed/centering unit. Ccimqtht2i

Year of construction: 1996, Condition: excellent (used), Braun Canali Cutting Band Saw Bfiw3xab82 TB 1100 Unimaster Roll diameter 1100mm with Planomatic system

Year of construction: 1996, Condition: used, Canali Band saw on sliding frame Cas7tlbs8m Sliding path 1500 mm

Year of construction: 1962, Condition: good (used), large band saw with 1250 mm roller diameter with center cutting device 45 kw motor Yslug0 roller width 120 mm with electr. saw blade tensioning the upper wheel has been removed for transport very good condition because little run was overhauled in 1997

Condition: used, Roller Moehringer / Braun Canali Roll Coat length 1400 mm Role distance 700 mm Length ca. 11000mm Lv0gsdg

Condition: used, Make: Alcos Material: CRS, HRPO, EG, GL, Pre-Paint Max Shear Strength: 50,000 PSI Max Yield Strength: 65,000 PSI Material Width: 12″ – 72″ Material Thickness: .015″ – .135″ Weight: 60,000Lbs Coil OD: 12″ – 72″ Coil ID: 20″ – 24″ Stacker Weight: 20,000Lb Max Line Speed: 250 feet per minute Direction: L–R 4-Arm Entry Tursntile Model: ST4-60K-72 Entry L-Type Coil Car Model: FCC-60K-72 Mandrel Uncoiler B8wfpfrr 4-Leaf Pumpkin Tooth Mandrel Powered Expansion Water Cooled Brake Hydraulic Feed Up Drive Sliding Base Powered Out-Board Support Hydraulic Peeling Table Driven Entry Pinch Rolls Hydraulic Entry Crop Shear Adjustable Edge Guides Scrap Receiving System Alcos 5-Hi Precision Leveler Model: 175-5H-72 Entry & Exit Driven Pinch Rolls Work Rolls Diameter: 1.75″ Number of Work Rolls: 19 Nine (9) Back Up Flights 150HP DC Motor Drive & Gear Box Alcos 5-Hi Precision Leveler Model: 150-5H-72 Entry Driven Pinch Rolls Number of Work Rolls: 19 Work Rolls Diameter: 1.5″ Nine (9) Flights of Back Up Flights 100HP DC Motor Drive & Gear Box Leveler Injection System Slitting Head Six (6) Cuts Capacity Model: S-72-135 Arbor Diameter: 7″ Motor: 40HP DC Digital Arbor Positioning System Knives & Tooling Scrap Baller Model: 135-SB-72 Max Scrap Size: 1″ Hydraulic Motor Drive Loop Table Entry & Exit Cascade Rolls Roll Feed Unit Model: RF-8-72 8″ Diameter Finish High Speed Mechanical Shear Speed: 60 cuts per minute Motor: 30HP AC Pneumatic Clutch & Brake 16′ Run Out Conveyor Stacking System Weight :20,000Lb Hydraulically Driven Chains Side Discharge Driven Chains Scape Conveyor Pallet Loading Conveyor Electrics, Hydraulics, Controls, Tooling, Spare Parts

Condition: used, Make: Alcos Material: CRS, HRPO, EG, GL, Pre-Paint Max Shear Strength: 50,000 PSI Max Yield Strength: 65,000 PSI Material Width: 12″ – 72″ Material Thickness: .015″ – .135″ Weight: 60,000Lbs Coil OD: 12″ – 72″ Coil ID: 20″ – 24″ Stacker Weight: 20,000Lb Max Line Speed: 250 feet per minute Direction: L–R 4-Arm Entry Tursntile Model: ST4-60K-72 Entry L-Type Coil Car Model: FCC-60K-72 Bni3liznazo Mandrel Uncoiler 4-Leaf Pumpkin Tooth Mandrel Powered Expansion Water Cooled Brake Hydraulic Feed Up Drive Sliding Base Powered Out-Board Support Hydraulic Peeling Table Driven Entry Pinch Rolls Hydraulic Entry Crop Shear Adjustable Edge Guides Scrap Receiving System Alcos 5-Hi Precision Leveler Model: 175-5H-72 Entry & Exit Driven Pinch Rolls Work Rolls Diameter: 1.75″ Number of Work Rolls: 19 Nine (9) Back Up Flights 150HP DC Motor Drive & Gear Box Alcos 5-Hi Precision Leveler Model: 150-5H-72 Entry Driven Pinch Rolls Number of Work Rolls: 19 Work Rolls Diameter: 1.5″ Nine (9) Flights of Back Up Flights 100HP DC Motor Drive & Gear Box Leveler Injection System Slitting Head Six (6) Cuts Capacity Model: S-72-135 Arbor Diameter: 7″ Motor: 40HP DC Digital Arbor Positioning System Knives & Tooling Scrap Baller Model: 135-SB-72 Max Scrap Size: 1″ Hydraulic Motor Drive Loop Table Entry & Exit Cascade Rolls Roll Feed Unit Model: RF-8-72 8″ Diameter Finish High Speed Mechanical Shear Speed: 60 cuts per minute Motor: 30HP AC Pneumatic Clutch & Brake 16′ Run Out Conveyor Stacking System Weight :20,000Lb Hydraulically Driven Chains Side Discharge Driven Chains Scape Conveyor Pallet Loading Conveyor Electrics, Hydraulics, Controls, Tooling, Spare Parts

Condition: reconditioned (used), Complete line of shrink packaging, consisting of : 1x PNC 20 A-D-M2 - double chamber machines with Busch pump 250mc/h, mechanical cutting, 4x830mm sealing trays 1x 4.5m long conveyor belt 1x rotary table with diameter of 150 9tbd7bkp7a Machines can also be purchased separately

Condition: excellent (used), Installed new in 2022, this conveyor was taking product from a low level multihead weigher up to a vertical form fill seal machine in a room where the height was restricted. As new condition. D7t2sqs

Condition: excellent (used), FULL LINE of Double-side Sizing-Milling & Edge Banding, max working width mm 2500, with automatic handling. Composed of the following machines: X04004A) Double Loader "BARGSTEDT" TBH 500/D/30/14 with central motorised roller conveyor X04004B) Turning station (90°) lengthwise to crosswise "HOMAG" Mod. TDR31/25/12 3jtzg X04004C) Splitter "HOMAG" Mod. FPR620/04/15/PS/LQ to split in two parts the unique panel X04004D) Seperation Station "BARGSTEDT" X04004E) Double-side Sizing & Edge Banding machine "HOMAG" Mod. KFR 620 / 19 / QA / 25 X04004F) 1° Automatic (through-feed) Multi Borer "WEEKE" Mod. BST 500 D X04004G) 2° Automatic (through-feed) Multi Borer "WEEKE" Mod. BST 500 D X04004H) Turning station (90°) crosswise to lengthwise "HOMAG" Mod. TDR 51/25/12 X04004I) Motorized belt transfer "HOMAG" TR 10/70/12 X04004L) Splitter "HOMAG" Mod. FPR620/04/15/PS/LQ to split in two parts the unique panel X04004M) Double Stacker "BARGSTEDT" Mod. TSP 420/40/30/12 BA with central motorised roller conveyor

Year of construction: 1999, Condition: ready for operation (used), This is a plant for the production of solid wood lamellas for glued wood panel production. Cwhfsihp3b The production process is roughly as follows: 1. Pre-planing of the boards on both sides (top/bottom) using a Kupfermühle Doin 605 copper mill 2. Automatic width measurement of the boards (Möhringer) 3. Automatic cutting of the measured boards into slats (currently slat width 40 + 50 mm) using a multi-rip saw CML 650T T700 4. Automatic transport of the cut lamellas to the GreCon cross-cut system 5. Waste strips from the multi-rip saw are sorted out manually and shredded with the help of a hydraulic cross-cutting press 6. 2-3 marker places, marking the mistakes with fluorescent chalk 7. Manual feeding of the marked lamellas onto the infeed belt to the cross-cut system 8. Optimized cutting of the lamellas with GreCon OptCut 704 R 9. Ejection of the cut lamellas at one of the 14 ejector positions (ejection to the left in transport direction) 10. Transport of the leftover trimmings behind the cross-cut system back to the disposal container Total length of the system approx. 65 m The system is still connected and could be visited at any time. Our asking price is € 135.000, without dismantling, ex works. Would the facility be of interest to you?

Condition: used, Hydraulic cylinder, synchronous cylinder, steering cylinder -Piston diameter: 38 mm -Piston rod: Ø 16 mm (M12 thread) 9biownvs8 -Stroke: 20 mm -Dimensions: 234/89/H50 mm -Weight: 3 kg

Year of construction: 2019, Condition: not inspected (used), Capacity: 240 units per hour; Line parts:; MF Stick 4B700, ; Suction product loading device; Special shape adjustment; Bjisd8zl 4-lanes oscillating dosing system; Dosing unit device; Hopper; Vibrator; Dust extractor; Cartooning device; Tele assistance; Single head inject marker; Technical features:; N° of lanes: 4; Stick width: 60 mm; Max. reel width: 700mm; Max. production speed: 60 cycles/minute; Stick length: Min.50mm. Max. 150 mm; Electric tension: 400 volt 3 phase 50/60 hertz; Installed electric power: 15 kW; Compressed air consumption: 500 Nl/min; . Compressed air compression: 6/7 bar; Painted frame: RAL 9006;

Condition: new, Paint drying cart 20/2X Arm length 780mm Distance between arms 120mm Bn7r9y0zrjy Min/Max material length 300/2650mm Number of arms 19

axe configuration: 3 axles, first registration: 05/2019, suspension: air, color: other, tire size: 385/55, Year of construction: 2019, Condition: used, Equipment: ABS, 🇬🇧 Information in English: Additional options and accessories Disc brakes, Lift Axle, SAF Axles More information Bodywork: Container transport, Year of construction: 2019, Tyre size: 385/55, Make axles: SAF, Tyre profile: 30%, Brakes: disc brakes, Rear axle 1: Lift axle, Serial number: WK0S0002400234186 🇳🇱 Information in Dutch: Additional options and accessories Elevator axle, SAF axles, Disc brakes Further information Coachwork: Container transport, Year of construction: 2019, Tire size: 385/55, Make of axles: SAF, Tire profile: 30%, Brakes: disc brakes, Rear axle 1: Lift axle, Serial number: WK0S0002400234186 🇫🇷 Informations en Français: Plus d'options et d'accessoires Mwgyb8kprb Essieu Relevable, Freins à disque, SAF Axles Plus d'informations Construction: Transport de conteneurs, Année de construction: 2019, Dimension des pneus: 385/55, Marque essieux: SAF, Sculptures des pneus: 30%, Freins: freins à disque, Essieu arrière 1: Essieu relevable, Numéro de série: WK0S0002400234186 🇩🇪 Informationen auf Deutsch: Weitere Optionen und Zubehör Liftachse, SAF Axles, Scheibenbremsen Further Information Aufbau: Container transport, Konstruktionsjahr: 2019, Refenmaß: 385/55, Marke Achsen: SAF, Reifen Profil: 30%, Bremsen: Scheibenbremsen, Hinterachse 1: Liftachse, Serial number: WK0S0002400234186

Year of construction: 2023, Condition: as good as new (ex-display), Functionality: fully functional, 3-5 layer CO-EXTRUSION LINE Screw diameter φ55/80/55 Effective Winding width: 100-1000mm (Max.) /2x500mm Thickness of film: 10-50my Raw material: LLDPE/LDPE Film structure: ACBCA Designed line speed (max.): 140m/min Rai7ffou Maximum extrusion capacity (max.) - 60-200kg/h Power supply: 380V, 50HZ/380v, three phase, 50Hz Consumption power: 90kW Paper core size: 3” paper core, I.D.76mm Edge recycling is in-line crushing by crusher Cooling part: Cooling roller size: φ420mm*1300mm Machine dimension (for reference): L7000MM*W3000MM*H3400MM Machine overall weight (for reference): 8.5t Produced in China to EU standards.

Year of construction: 2009, Condition: excellent (used), Control: Fanuc 310i Main spindle Speed: 10,000 rpm Power: 5.5 kW Torque: 14 Nm Bar capacity: max. 20 mm C1 axis: 0.001 Z1 axis travel: 80 mm Counter spindle Bjjgsn8yaky Speed: 10,000 rpm Power: 5.5 kW Torque: 14 Nm C2 axis: 0.001 Travel X2 / Z2 axis: 240 / 300 mm Rapid traverse in X2 / Z2 axis: 40 m/min Tool carrier I (X/Y) Technology: Linear slide Internal machining: 6 stations Tool holder: 20 mm External machining: 6 stations Tool holder: 12 x 12 mm Driven tool stations: 5 Tool drive: 3,450 / 6,000 rpm Tool holder: Collet chuck, ESX 16 Travel in X/Y axis: 50/350 mm Rapid traverse in the X/Y axis: 40/30 m/min Bar loader BOSS 332 E Tool carrier II (Y) Technology: Linear slide Internal machining: 4 stations Hu0bnwo Tool holder: 20 mm External machining: 4 stations Tool holder: 12 x 12 mm Driven tool stations: 5 Tool drive: 3,450 / 6,000 rpm Tool holder: collet chuck, ESX 16 Traverse path in Y2 axis: 120 mm Rapid traverse in the Y2 axis: 40 m/min MACHINE DETAILS Weight: 4200 kg Connected load: 30 kVA Operating voltage: 400 V / 50 Hz EQUIPMENT Chip management: Chip conveyor Coolant management: Coolant pump Oil mist extraction: Interface prepared Further equipment: Signal lamp Chip conveyor Coolant pump

Year of construction: 1986, Condition: used, Multi-chamber immersion system ROLL type RVT 48/32/20/1 Com. no. 3308 Year 1986, with retrofitted drying Com. no. K 3627 Year 1988 Technical data: Basket size L x W x H 480 x 320 x 200 mm Cycle time according to program, time can be preselected Drying hot air, negative pressure Set temperatures basin approx. 70° C Exhaust air volume 13 cbm/min. at 1800 Pa Compressed air consumption depending on program Cooling water consumption depending on program or throughput Heating hot air 18 kW Gxaymlu Operating pressure min. 6 bar Operating vacuum approx. 100 mbar Total connected load incl. cleaning system K 3308 Heating 46 kW, 70 A Motors 12.3 kW, 34 A Dimensions 3600 x 1800 x 2600 mm Weight approx. 1500 kg With - Siemens S5-115 control system - 1989 converted to aqueous alkaline detergents used, in good condition, at that time new price DM 240.000,-- We need space! Current special price from our warehouse/location - as available, free truck loading € 6.500,-- If both ROLL cleaning systems are purchased, SPECIAL PRICE together € 10.000,--!

Condition: good (used), Functionality: fully functional, LiSEC, h=2.0 m, autom. IGU – Glass Line (Gas + Robot) 0l2lzp2 Autom. IGU Glass production line, H=2.0 m, Left – Right Gas Press, Sealing robot, 6 Brushes Washing Machine (Low-E), … In good working condition. Available: June 2024

Year of construction: 1992, Condition: reconditioned (used), Multiblock wire drawing line EURODRAW Max INLET wire diam. - 5,50 mm Outlet wire diam. - 1,60 - 4,80mm; Material - Low carbon steel wire Model - 460/7 Year - 1992. Number of blocks - 7 blocks Block diam. - 460 mm Number of drawing dies - 7 + coiler Max. pull on 1st draft: 800kg Final drawing speed: 15m/sec. Main D.C. motor power: 7 x 33.6kW, 1620 RPM Supply voltage: 415V – 50 Hz – 3 phase Take-up: ROT 560 coiler Machine is MECHANICALLY fully reconditioned , Electric ORIGIN from 1992. Ckoq3p20 Line consist of the following parts - 1. Payoff 2. Mechanical descailer with bruches AND dust collecting unit 3. Chemical wire threatment unit 4. Drawing line with 7 blocks 5. Coiler 6. Electrical cabinet

Condition: new, S1 Spindle Motor Cable. New and unused. For reference please check photo with for cross reference Any questions please ask Mnm97vfwpx

Year of construction: 1994, Condition: used, Sold here is a euro pallet making machine. The plant is a combination of three different machine manufacturers. The plant is from the 90s. 87cio8lnce With 2 production assistants it is possible to produce around 1000 Euro pallets in 8 hours. For specific questions I will give you the direct contact details of our production manager.

Condition: new, 0 830 x 530 x 530 mm operating pressure 2,2 - 5,5 bar Air consumption 250 l/min. weight of the machine ca. 50 Kg Vveqvhez 0,95 x 0,65 x ,7 cm

Year of construction: 1986, Condition: used, Multi-chamber immersion system ROLL type RVT 48/32/20/1 Com. no. 3308 Year 1986, with retrofitted drying Com. no. K 3627 Year 1988 Technical data: Basket size L x W x H 480 x 320 x 200 mm Cycle time according to program, time can be preselected Drying hot air, negative pressure Set temperatures basin approx. 70° C Exhaust air volume 13 cbm/min. at 1800 Pa Compressed air consumption depending on program Cooling water consumption depending on program or throughput Heating hot air 18 kW Bkunpidmotr Operating pressure min. 6 bar Operating vacuum approx. 100 mbar Total connected load incl. cleaning system K 3308 Heating 46 kW, 70 A Motors 12.3 kW, 34 A Dimensions 3600 x 1800 x 2600 mm Weight approx. 1500 kg With - Siemens S5-115 control system - 1989 converted to aqueous alkaline detergents used, in good condition, at that time new price DM 240.000,-- We need space! Current special price from our warehouse/location - as available, free truck loading € 6.500,-- If both ROLL cleaning systems are purchased, SPECIAL PRICE together € 10.000,--!